Hubs
-
Gran Compe Pro NJS Track Hub Set 36H
Out of stock
Gran Compe`s first NJS approved track hub.
These high flange, double sided (fixed/fixed) track hubs are threaded with a sealed bearing.
Learn MoreUSD$292.50 -
Kinugawa chain tensioners - pair (NJS certified)
Budget priced, simple, but effective! Mr Nagasawa includes these with the frames he builds for pro riders.
They fit both 110mm/8mm and 120mm/10mm track frame ends and are sold in pairs. Made in Japan, and NJS stamped and approved.
Learn MoreUSD$11.00 -
MKS chain tensioner for aluminium frames - CA-MX10
If you have an aluminium frame which has thick end plates, you need these chain tensioners, and not the NJS type. The NJS type only fit on steel frames. Learn MoreUSD$16.50 -
Shimano Dura Ace 110mm/8mm hub shaft/axle conversion kit
This set will convert Dura Ace hubs to fit perfectly on a 110mm spaced keirin frame. Included are the axles you need for the conversion and the optional nuts (for an additional cost). Learn MoreUSD$66.50 -
Shimano Dura Ace HB-7600 Track Hubs 28H
A 28 hole front, rear or, set with 120mm width with a 10mm thick axle diameter in the rear and 100mm width with a 9mm axle diameter in the front
Learn MoreUSD$292.50 As low as: USD$137.00 -
Shimano Dura Ace HB-7600 Track Hubs 32H
A 32 hole front, rear or, set with 120mm width with a 10mm thick axle diameter in the rear and 100mm width with a 9mm axle diameter in the front
Learn MoreUSD$292.50 As low as: USD$137.00 -
Shimano Dura Ace HB-7600 Track Hubs 36H NJS
A 36 hole front, rear or, set with your choice of :
- 120mm width with a 10mm thick axle diameter in the rear and 100mm width with a 9mm axle diameter in the front
- 110mm width with a 8mm thick axle diameter in the rear and100mm width with a 8mm axle diameter in the front
Learn MoreUSD$292.50 As low as: USD$137.00 -
Shimano Dura Ace HB-7710 Track Hubs 28H
A 28 hole front, rear or, set with 120mm width with a 10mm thick axle diameter in the rear and 100mm width with a 9mm axle diameter in the front
Learn MoreUSD$225.50 As low as: USD$107.50 -
Shimano Dura Ace HB-7710 Track Hubs 32H
A 32 hole front, rear or, set with 120mm width with a 10mm thick axle diameter in the rear and 100mm width with a 9mm axle diameter in the front
Learn MoreUSD$225.50 As low as: USD$107.50 -
Shimano Dura Ace HB-7710 Track Hubs 36H NJS
Shimano's low flange hub with ultra fast cup and cone bearings. Ready for track racing.
Learn MoreUSD$225.50 As low as: USD$107.50 -
Shimano Dura Ace track hub nuts
Replacement chromed steel track hub nuts, from Shimano. These are the nuts fitted as standard on the Dura Ace NJS hubs. They are the best quality, and will not rust! Learn MoreUSD$22.00 -
Shimano Dura Ace Track Lockring (NJS)
Lockring to suit most track hubs, produced to a very high quality standard, suitable for use at a pro racing level.
Learn MoreUSD$12.00 -
Sugino Gigas Track 12t Cog Lockring (NJS)
This Sugino lockring is designed specifically for use in conjunction with the Sugino Gigas 12T track cog.
Learn MoreUSD$31.00 -
Tempra - Track Bike Hub Nuts - Anti-Theft Nut & Tool Set
Tempra Anti-Theft hub nuts, for track hubs.
These nuts replace your standard track hub outer nuts, and includes a special TEMPRA tool which replaces the standard
15mm wrench you would normally use to fit or remove your wheel.
Learn MoreUSD$74.00
