Wheels

  1. Hirame / Kuwahara pump head / (Presta/French) adapter + 3 pack of seals

    Hirame / Kuwahara pump head / (Presta/French) adapter + 3 pack of seals

    The Hirame pump adapters are hand made at Kuwahara by one man. It can handle very high pressure without popping off while you are pumping air.

    Learn More
    JPY¥6,200
  2. Hoshi Keirin Stainless Aero Racing Spokes (NJS)

    Hoshi Keirin Stainless Aero Racing Spokes (NJS)

    NJS Approved 305mm aero stainless racing spokes from Hoshi, Japan.
    Learn More
    JPY¥6,000
  3. Hoshi Keirin Stainless Double Butted Racing Spokes (NJS)

    Hoshi Keirin Stainless Double Butted Racing Spokes (NJS)

    NJS Approved 305mm double butted stainless racing spokes from Hoshi, Japan.
    Learn More
    JPY¥5,800
  4. Kinugawa chain tensioners - pair (NJS certified)

    Kinugawa chain tensioners - pair (NJS certified)

    Budget priced, simple, but effective! Mr Nagasawa includes these with the frames he builds for pro riders.
    They fit both 110mm/8mm and 120mm/10mm track frame ends and are sold in pairs. Made in Japan, and NJS stamped and approved.
    Learn More
    JPY¥1,500
  5. Miyata - Tubular Tire Double-Sided Adhesive Tape

    Miyata - Tubular Tire Double-Sided Adhesive Tape

    This is a clean, easy, quick alternative to using glue when fitting tubular tires to your rims.
    Learn More
  6. MKS chain tensioner for aluminium frames - CA-MX10

    MKS chain tensioner for aluminium frames - CA-MX10

    If you have an aluminium frame which has thick end plates, you need these chain tensioners, and not the NJS type. The NJS type only fit on steel frames. Learn More
    JPY¥1,890
  7. MKS Chain Tensioners (Mikashima CA-NJS)

    MKS Chain Tensioners (Mikashima CA-NJS)

    Chain Tensioners, for 120mm rear spaced track frames.
    These help set and hold the chain tension on your track frame, and are used by Keirin pro track racers in Japan.
    Learn More
    JPY¥4,200
  8. Panaracer - Gravel King - Clincher Tire 23c 700c - Black w/Brown Sidewall

    Panaracer - Gravel King - Clincher Tire 23c 700c - Black w/Brown Sidewall

    The Gravel King is a high quality, puncture resistant clincher made in Japan
    Learn More
    JPY¥4,900
  9. Panaracer - poly-Lite - 700c clincher rim tape

    Panaracer - poly-Lite - 700c clincher rim tape

    700c clincher rim tape from Panaracer.
    One pack includes two pieces (enough to do a front and rear set of wheels)
    Learn More
    JPY¥680
  10. Panaracer Elite Plus - Clincher Tire - Training

    Panaracer Elite Plus - Clincher Tire - Training

    An affordable treaded clincher training tire from Panaracer with moderate grip and weight for use on the road or for track training. Made in Japan.
    Learn More
    JPY¥3,200
  11. Panaracer Practice 230 Tubular Tire - Black - 650c

    Panaracer Practice 230 Tubular Tire - Black - 650c

    The Panaracer Pratice 230 is Panasonic's staple tubular tire, that is durable on the track and the street.
    Learn More
    JPY¥3,800
  12. Panaracer Practice 270 Tubular Tire 700c - Black

    Panaracer Practice 270 Tubular Tire 700c - Black

    The Panaracer Pratice 270 is Panasonic's staple tubular tire, that is durable on the track and the street.
    Learn More
    JPY¥3,800
  13. Panaracer Race D Evo3 - Clincher Tire - Race/Endurance

    Panaracer Race D Evo3 - Clincher Tire - Race/Endurance

    Durable, light race-quality tire from Panaracer; made in Japan.
    Available in all-black, or black with brown side wall, and in 23, 25 and 28c sizes.
    Puncture protection, and dual-compound rubber make these a great choice.
    Learn More
    JPY¥6,200
  14. Panaracer Race L Evo3 - Clincher Tire - Lightweight/Race

    Panaracer Race L Evo3 - Clincher Tire - Lightweight/Race

    Super-light race-quality tire from Panaracer; made in Japan.
    Available in all-black only, and in 20, 23, and 25c sizes.
    Puncture protection layer, and dual-compound rubber make these a great choice.
    Learn More
    JPY¥5,600
  15. Shimano Dura Ace 110mm/8mm hub shaft/axle conversion kit

    Shimano Dura Ace 110mm/8mm hub shaft/axle conversion kit

    This set will convert Dura Ace hubs to fit perfectly on a 110mm spaced keirin frame. Included are the axles you need for the conversion and the optional nuts (for an additional cost). Learn More
    JPY¥8,500
  16. Shimano Dura Ace HB-7600 Track Hubs 28H

    Shimano Dura Ace HB-7600 Track Hubs 28H

    A 28 hole front, rear or, set with 120mm width with a 10mm thick axle diameter in the rear and 100mm width with a 9mm axle diameter in the front
    Learn More
  17. Shimano Dura Ace HB-7600 Track Hubs 32H

    Shimano Dura Ace HB-7600 Track Hubs 32H

    A 32 hole front, rear or, set with 120mm width with a 10mm thick axle diameter in the rear and 100mm width with a 9mm axle diameter in the front
    Learn More
  18. Shimano Dura Ace HB-7600 Track Hubs 36H NJS

    Shimano Dura Ace HB-7600 Track Hubs 36H NJS

    A 36 hole front, rear or, set with your choice of :
    - 120mm width with a 10mm thick axle diameter in the rear and 100mm width with a 9mm axle diameter in the front
    - 110mm width with a 8mm thick axle diameter in the rear and100mm width with a 8mm axle diameter in the front
    Learn More
  19. Shimano Dura Ace HB-7710 Track Hubs 28H

    Shimano Dura Ace HB-7710 Track Hubs 28H

    A 28 hole front, rear or, set with 120mm width with a 10mm thick axle diameter in the rear and 100mm width with a 9mm axle diameter in the front
    Learn More
  20. Shimano Dura Ace HB-7710 Track Hubs 32H

    Shimano Dura Ace HB-7710 Track Hubs 32H

    A 32 hole front, rear or, set with 120mm width with a 10mm thick axle diameter in the rear and 100mm width with a 9mm axle diameter in the front
    Learn More