Drivetrain Small Parts
-
Giracha - Crank Dust Caps - Silver Aluminum - Hex type
The perfect finishing touch for Dura Ace FC7600, Sugino 75, Suntour Superbe and other square taper track and road crank sets. Learn MoreUSD$20.00 -
Hatta NJS Bottom Bracket Lockring
This is a replacement Lockring for Hatta R9400 Bottom Brackets.
Also fits Sugino 75 Bottom brackets Including Super Lap and Ceramic Bottom Brackets.
Learn MoreUSD$16.50 -
Hatta R9400 - replacement bearings/retainer set - NJS
New replacement ball bearings and retainers, for Hatta R9400 NJS Bottom Brackets! Learn MoreUSD$32.50 -
Kinugawa chain tensioners - pair (NJS certified)
Budget priced, simple, but effective! Mr Nagasawa includes these with the frames he builds for pro riders.
They fit both 110mm/8mm and 120mm/10mm track frame ends and are sold in pairs. Made in Japan, and NJS stamped and approved.
Learn MoreUSD$10.00 -
MKS chain tensioner for aluminium frames - CA-MX10
If you have an aluminium frame which has thick end plates, you need these chain tensioners, and not the NJS type. The NJS type only fit on steel frames. Learn MoreUSD$15.00 -
MKS Chain Tensioners (Mikashima CA-NJS)
Chain Tensioners, for 120mm rear spaced track frames.
These help set and hold the chain tension on your track frame, and are used by Keirin pro track racers in Japan.
Learn MoreUSD$31.50 -
Nitto Stainless Bolt Caps
These Stainless Bolt caps are a clever new product from Nitto. Available in M5, M6 or M8 sizing in value-packs of 4 or as singles. Learn MoreUSD$6.50 -
Shimano Dura Ace 7710 crank dust cap set
Replacement dustcaps and washers for Dura Ace Octalink 7710 crank sets. These also enable you to remove your cranks using only a hex wrench (7710 cranks only). Learn MoreUSD$16.50 -
Shimano Dura Ace Stainless steel chainring bolt set - (knurled!)
These are the Shimano Dura Ace 5 pin hex bolts to connect your cranks to your chainring.
These are the new Stainless steel ones, and most importantly, they are knurled!
This means that they set into your crank holes and stay put.
Learn MoreUSD$19.50 -
Sugino 75 crank dust caps
These dust caps are what you have been missing, since Sugino decided not to include them with cranksets. While the old type were chrome, these ones are aluminium with a shiny anodized finish, which match quite well to the finish of the Sugino 75 cranks. Learn MoreUSD$24.50 -
Sugino 75 NJS Bottom Bracket Lockring
This is a replacement Lockring for Sugino 75 Bottom Brackets.
Also fits Super Lap and Ceramic Bottom Brackets.
Learn MoreUSD$20.00 -
Sugino 75 Stainless steel chainring bolt set - (knurled!)
This is an official SUGINO 75 pro-race quality, 5 pin hex bolt set to connect your cranks to your chainring.
These are the new Stainless steel ones, and most importantly, they are knurled!
This means that they set into your crank holes and stay put.
Learn MoreUSD$30.00 -
Sugino Bottom Bracket Dust Shield
Replacement dust shield for Sugino bottom brackets.
Will also fit Hatta Bottom Brackets. Learn MoreUSD$11.50 -
Sugino crank/chainring bolt set (5 pin)
From Sugino Japan comes this special set of torx chainring bolts. These are used to attach your chainring to your right side crank arm.You get a torx wrench included with the kit. Learn MoreUSD$41.00